Ford Focus 2000-2018 Oil Maintenance Light Reset

Ford Focus 2000-2018 Oil Maintenance Light Reset

The original Focus was nimble and fun to drive, with quick and communicative steering and a comfortable ride. It had lots of interior room and easy access, but performance and fuel economy were only average. Body styles included a sedan, a roomy wagon, and a hatchback. A sporty, crisp-handling SVT performance-oriented hatchback was offered from 2002 to 2004. Without its optional side airbags, the Focus received a Poor in the IIHS side-crash test, so you'll want to avoid models without them. After the model year 2008 revision, handling isn't as crisp, interior quality dropped off and the cabin got noisier. On the plus side though, a coupe version arrived in 2008.

Model year 2012 brought sporty handling and a nice interior back to the Focus. It also debuted an electric version of the Ford subcompact. Focus Electric has all the underlying qualities of the internal combustion-powered Focus models we love to like; including taut handling, good ride and nicely finished interior. It also provides the many benefits of an electric powertrain. These include silent running, cheap operation and effortless acceleration. Unfortunately, it also shares some of the Focus's basic flaws, including a very cramped back seat and the frustrating MyFord Touch radio controls. Standard safety features include stability control, traction control, and antilock brakes.

Oil Reset Instruction Below.

1. Turn the key to indicator. 
2. Do not start the engine. 
3. For push button starts, just press the button once without starting the engine.
4. For turn key ignitions, press both the gas and brake simultaneously for about 20 seconds. 
5. For push button models, press and hold the button and the gas pedal simultaneously for about 20 seconds. The display will say “Resetting Oil”. 
6. Keep pressed until it says completed.

Other Oil Reset Instruction

1. Using the directional pad on the left side of the steering wheel, select “Settings“.
2. Choose “Vehicle“.
3. Select “Oil Life Reset“.
4. Press and hold the “OK” button.
5. Select the percentage you wish to be warned for your next oil change.

Other Oil Reset Instruction

1. Turn the ignition to the ON position without starting the engine
2. *For vehicles with push-button start, press and hold the START button for 2 seconds without pressing the brake pedal to put in ON mode
3. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position
4. After 3 seconds, the message center displays “Service: Oil Reset In Prog”
5. Continue to hold both the accelerator and brake pedals for 25 seconds or until the display shows “Service: Oil Reset Complete”
6. Release both pedals and place ignition in the OFF position/mode.

Other Oil Reset Instruction

1. Press and hold the START button for 2 seconds without pressing the brake pedal to put in ON mode.
2. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position.
3. After 3 seconds, the message center displays “Service: Oil Reset In Prog”
4. Continue to hold both the accelerator and brake pedals for 25 seconds or until the display shows “Service: Oil Reset Complete”
5. Release both pedals and place ignition in the OFF position/mode

Other Oil Reset Instruction

1. To reset the Oil Service monitor: 
2. with car off, press and hold the “start button” with no pedals pressed (get it into ACC mode). 
3. Then press both the brake and gas pedal together and hold. You’ll see messages pop up. 
4. Keep holding until you get a message saying the service interval monitor has been reset.

Other Oil Reset Instruction

1. Close all doors.
2. Turn the ignition key to position II.
3. Simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 15 seconds.
4. The oil change reminder indicator will turn off. This confirms that the reset procedure has been correctly completed.

Other Oil Reset Instruction

1. Turn off the ignition
2. Close all doors.
3. Turn the ignition key to position II.
4. Simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 20 seconds.
5. The oil change reminder indicator will turn off. This confirms that the reset procedure has been correctly completed.