The Mechanic Online Reference

Aug 10, 2018

Ford Mondeo Fusion 2000-2018 Oil Maintenance Light Reset

Ford Mondeo  Fusion 2000-2018 Oil Maintenance Light Reset

Ford Modeo  Fusion 2000-2018 Oil Maintenance Light Reset

The Fusion/ Mondeo is a delight to drive, with a supple ride and nimble handling reminiscent of a European sports sedan. All trim levels and powertrains feel solid and upscale, with a well-finished and quiet cabin. We found the optional leather seats to be more supportive than the cloth ones, and the rear seat is somewhat snug. The 1.5- and 2.0-liter turbo four-cylinders are powerful enough, but neither has competitive fuel economy. A new high-end version, the Sport, is equipped with all-wheel drive and a 325-hp, 2.7-liter V6. It is quick, comfortable, and quiet, but it costs more than $40,000. The Hybrid and Energi plug-in hybrid were updated with more-efficient electric motors. A rotary shift dial and Ford's improved Sync 3 infotainment system highlight the updates to the interior.

A 2013 redesign brought turbocharged and non-turbo four-cylinder engines, as well as a more solid and upscale feel, with a supple ride, quiet cabin, and handling rivaling a European sports sedan. Electronic stability control, traction control, and antilock brakes are standard. Ford's standard MyKey system lets parents program a key for their teen driver to set limits on speed, Bluetooth phone use and radio volume. As usually, MyFord Touch generated a lot of complaints for its unintuitive interface. Spotter mirror inserts are provided on the outside door mirrors to show vehicles in the blind zone along the sides of the car. While this low-tech solution is effective, it isn't easy to use at night.

Please follow the Oil reset instruction below.

  1. Turn the ignition to the “ON” position but do not start engine
  2. Scroll through the display on your Ford Fusion instrument cluster using your SETUP button until you see OIL LIFE shown.
  3. Push down on the RESET button for more than two seconds.
  4. Turn ignition OFF and then start engine.

Other Oil Reset Instruction

  1. Turn the ignition to the ON position without starting the engine
  2. *For vehicles with push-button start, press and hold the START button for 2 seconds without pressing the brake pedal to put in ON mode
  3. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position
  4. After 3 seconds, the message center displays “Service: Oil Reset In Prog”
  5. Continue to hold both the accelerator and brake pedals for 25 seconds or until the display shows “Service: Oil Reset Complete”
  6. Release both pedals and place ignition in the OFF position/mode

Other Oil Reset Instruction


  1. Use the UP and DOWN arrow buttons to scroll to the Settings menu and press the RIGHT arrow to enter the submenu
  2. Scroll to the Vehicle menu and press the RIGHT arrow
  3. Scroll to the Oil Life Reset menu and press the OK button

Other Oil Reset Instruction

  1. Press and release the SETUP button to display “Oil Life XXX% Hold Reset = New”
  2. Press and hold the RESET button for 2 seconds and release to reset oil life to 100%

Other Oil Reset Instruction

1. Turn the ignition to run (one position before starting engine).
2. Use the steering wheel controls to scroll to the Settings Menu and press the right arrow button.
3. Scroll to the Vehicle Menu and press the right arrow button.
4. Scroll to Oil Life and press the right arrow button.
5. Hold the OK button until the display shows "Reset Successful".
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

Other Oil Reset Instruction

  1. Turn the ignition to run (one position before starting engine).
  2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”.
  3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset

Other Oil Reset Instruction

1. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”.
2. Press and hold RESET for two seconds and release. Oil life is set to 100% and “OIL LIFE SET TO 100%” is displayed.

No comments:

Post a Comment