Ford Fiesta 2003-2018 Oil Maintenance Light Reset

Ford Fiesta 2003-2018 Oil Maintenance Light Reset

The subcompact Fiesta, offered in sedan and four-door hatchback bodies, drives nicely, with agile handling and a supple, controlled ride. Wind, road, and engine noise are well suppressed. Interior fit and finish and equipment levels are impressive for the class, with soft-touch dash materials and Ford's Sync handsfree system. However, the rear seat is extremely cramped. In our tests, the Fiesta feels slow, but fuel economy is excellent. The sporty ST version is a blast to drive with its turbo four-cylinder and manual transmission. The manual-only turbo three-cylinder SFE version is aimed at maximizing fuel economy. This generation of the Fiesta was introduced in 2010, with incremental changes added through 2013. The 2014 update included new front-end styling with a larger chrome-accented grille. MyFord Touch, Ford's up-level infotainment system, also became available for 2014.

2011

1. Start with the ignition switch in OFF position
2. Turn ignition switch to ACC position
3. For vehicles with push-button start, press the START button once quickly without pressing the brake pedal to put in ACC mode
4. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position for 20 seconds or until “Engine Oil Change Due Next Service” is displayed
5. Release both pedals and place ignition in the OFF position/mode

2014-2015

1. Turn the ignition to the ON position without starting the engine
2. * For vehicles with push-button start, press and hold the START button for 2  seconds without pressing the brake pedal to put in ON mode
3. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position
4. After 3 seconds, the message center displays “Service: Oil Reset In Prog”
5. Continue to hold both the accelerator and brake pedals for 25 seconds or until the display shows “Service: Oil Reset Complete”
6. Release both pedals and place ignition in the OFF position/mode

2012-2013

1. Start with the ignition switch in OFF position
2. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position
3. * For vehicles with push-button start, press accelerator pedal only
4. Turn the ignition to the RUN position (do not start engine)
5. * For vehicles with push-button start, push the START/STOP button once quickly, then while still holding the accelerator pedal, depress the brake pedal also
6. Keep both pedals fully depressed for at least 20 seconds
7. Turn the vehicle to the OFF position, then start the vehicle to verify oil change reminder is no longer displayed and/or the light is no longer illuminated

OTHER OIL RESET INSTRUCTION:

To reset the oil change warning light:

1. Turn on the ignition (not the engine).

2. Hold down the brake and accelerator for twenty seconds until the warning light goes off.

OTHER OIL RESET INSTRUCTION:

Turn off the ignition

Close all doors.

Turn the ignition key to position II.

Simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 20 seconds.

The oil change reminder indicator will turn off. This confirms that the reset procedure has been correctly completed.

OTHER OIL RESET INSTRUCTION:

Turn the ignition to ON so the error comes up on the screen and the orange console light also illuminates.  Do not start the engine.

Press and hold both the brake and accelerator pedals down for 20 seconds.  The light will extinguish on the console.

Turn the ignition off and then on, the error/notification should no longer be present.

OTHER OIL RESET INSTRUCTION:

Begin with the ignition off.

Turn the key to the accessory position for keyed vehicles and for push button start vehicles press the Start/Stop button once quickly. DO NOT attempt to start the engine.

Press the accelerator and brake pedals fully for 20 seconds.

ENGINE OIL CHANGE DUE NEXT SERVICE and Engine Oil, Oil life monitoring system reset, Ford Fiesta will display.

Turn the vehicle off. The message and lights will be cleared.

OTHER OIL RESET INSTRUCTION:

Reset the oil change indicator on the 2011-2017 Ford Focus using these steps.

Option 1

Turn the key to indicator. Do not start the engine. For push button starts, just press the button once without starting the engine.

For turn key ignitions, press both the gas and brake simultaneously for about 20 seconds. For push button models, press and hold the button and the gas pedal simultaneously for about 20 seconds. The display will say “Resetting Oil”. Keep pressed until it says completed.

Thanks to “Chip” for this tip.

Option 2

Using the directional pad on the left side of the steering wheel, select “Settings“.

Choose “Vehicle“.

Select “Oil Life Reset“.

Press and hold the “OK” button.

Select the percentage you wish to be warned for your next oil change.

Please comment which reset instruction work for you!