Honda Accord Maintenance Minder Engine Oil Life Reset
The 2008 redesign made the Accord a larger, roomier car with an immense rear seat. Most importantly, this vintage comes with standard electronic stability control on all versions, a vital safety feature which in itself justifies looking only at 2008 or newer Accords. Ride and handling are very good, and the four-cylinder engine is smooth, powerful, and economical. The V6 is smoother, quiet and powerful, but gets just 21 mpg overall. Controls remain a model of clarity and driver visibility is generous. Try to focus on an EX, which is has a power driver seat, sunroof, and alloy wheels.
Engine Oil Life Display.
To see the current engine oil life,
turn the ignition switch to the ON
(II) position, then press and release
the select/reset knob repeatedly
until the engine oil life indicator
appears.
The remaining engine oil life is
shown on the display according to
this table:
If the remaining engine oil life is 15 to 6 percent, you will see the engine oil life indicator every time you turn the ignition switch to the ON (II) position. The maintenance minder indicator will also come on, and the maintenance item code(s) for other scheduled maintenance items needing service will be displayed next to the engine oil life indicator.
The 15 and 10 percent oil life indicators remind you that your vehicle will soon be due for scheduled maintenance.
When the remaining engine oil life is 5 to 1 percent, you will see a ‘‘SERVICE’’ message along with the same maintenance item code(s), every time you turn the ignition switch to the ON (II) position.
Resetting the Engine Oil Life Display
Your dealer will reset the display after completing the required maintenance service. You will see ‘‘OIL LIFE 100%’’ on the information display the next time you turn the ignition switch to the ON (II) position.
If maintenance service is done by someone other than your dealer, reset the maintenance minder as follows:
1. Turn the ignition switch to the ON (II) position.
2. Press the select/reset knob repeatedly until the engine oil life indicator is displayed.
3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to ‘‘100.’’
2. Press the select/reset knob repeatedly until the engine oil life indicator is displayed.
