Toyota landcruiser t-belt Warning Light Reset Instruction

Toyota landcruiser t-belt Warning Light Reset Instruction

The Land Cruiser is luxurious, quick, quiet, comfortable, and refined. Toyota's flagship SUV has the same smooth and powerful 5.7-liter V8 as the Tundra pickup. We tested it with the old six-speed transmission, and it proved to be thirsty for fuel, at 14 mpg overall; an eight-speed automatic transmission is now standard. The big Land Cruiser rides very comfortably, and the interior is roomy and well-finished. Expect terrific off-road performance, helped by a crawl mode to ascend and descend steep slopes. But on-road handling is rather clumsy. Automatic emergency braking, blind-spot monitoring, lane-departure warning, and rear cross-traffic alert are standard. Electronic connectivity is also updated, with Toyota's Entune touch-screen audio system standard.

Reset timing belt replacement warning lamp as follows: 

1. Switch ignition ON.
2. Ensure ODO/TRIP display set to ODO information. 
3. Switch ignition OFF.
4. Press and hold ODO/TRIP display switch. 
5. Switch ignition ON. 
6. Wait 5 seconds. 
7. Release switch.
8. Within 5 seconds press and release switch. 
9. The setting value is displayed.
10. Press and hold ODO/TRIP display switch. 
11. Wait more than 5 seconds. 
12. Release switch.
13. Ensure ODO information displayed and warning lamp goes out.
14. Done

Suitable for the Following model:

• Toyota Roraima T-belt reset
• Toyota Land Cruiser V8  T-belt reset
• Lexus LX 470 T-belt reset
• Toyota Land Cruiser GXL (UZJ100 T-belt reset
•  Toyota Land Cruiser GXL (HDJ100 T-belt reset
• Prado Toyota Land Cruiser T-belt reset

If the above tutorial fail, please follow the instruction below!

1. Switch ignition ON.
2. Press tachometer switch. 
3. Ensure ODO displayed. 
4. Switch ignition OFF.
5. Press tachometer switch. 
6. Switch ignition ON.
7. Press tachometer switch for 5 seconds.
8. Release tachometer switch and press again within 5 seconds. 
9. RHD: '9' will be displayed.
10. LHD: '15' will be displayed.
11. Press tachometer switch for 5 seconds. 
12. Release tachometer switch.

1. Ensure ODO displayed and warning lamp goes out.