Jeep Wrangler Manual Compass Calibration Procedure

Jeep Wrangler Manual Compass Calibration Procedure

If the compass appears erratic and the “CAL” indicatordoes not appear in the EVIC display, you must put the compass into the Calibration Mode manually as follows:

1. Start the engine. Leave the shift lever in PARK in order to enter the EVIC Programming Menus.

2. Push  the  MENU  button  until  Personal  Settings (Customer-Programmable Features) displays in the EVIC.

3. Push the DOWN button until “Calibrate Compass”displays in the EVIC.

4. Push and release the SELECT button to start the calibration. The “CAL” indicator will display in the EVIC.

5. Complete one or more 360–degree turns (in an area free from large metal or metallic objects) until the “CAL” indicator turns off. The compass will now function normally.

To Change The Compass Variance:

1. Turn the ignition switch RUN (it is not necessary to start the engine).

2. Push  the  MENU  button  until  Personal  Settings Customer-Programmable Features) displays in the EVIC.

3. Push the DOWN button until “Compass Variance” message and the last variance zone number displays in the EVIC.

4. Push and release the SELECT button until the proper variance zone is selected according to the map.

5. Push and release the COMPASS button to exit